Accessories for Fasteners

Setting tools, testers and other accessories for installing and inspecting anchor fasteners

56 Products

HAT 28 Anchor tester

Description

Tester for proof loading and determination of pullout resistance of anchors and DX fasteners

_{No technical data available}

IDMS Metal insulation dowel

Description

Insulation mandrel

_{No technical data available}

HIT-SZ Injection accessories

Description

Accessories for injectable mortars, including piston plugs and extension hoses

_{No technical data available}

Hose HIT-VL 11/1.0

Description

Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal

Plug Diameter

12 - 35 mm

Threaded stud HDC 20

Description

Refill packs (studs, hooks) for the HD Hand-drive tool kit

_{No technical data available}

Threaded stud HDB 27

Description

Refill packs (studs, hooks) for the HD Hand-drive tool kit

_{No technical data available}

Threaded stud HDA 35

Description

Refill packs (studs, hooks) for the HD Hand-drive tool kit

_{No technical data available}

Extension hose HIT-VL 11/10.0

Description

Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal

Plug Diameter

12 - 35 mm

Mixer HIT-RE-M

Description

Mixers and extensions for injectable mortars

_{No technical data available}

Blow-out pump

Description

Injectable mortar accessories for blowing out

_{No technical data available}

_New

HKD-TE-CX Setting tool (long)

_New

ultimate

Description

Setting tool for long HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit

Connection end

TE-C (SDS-plus)

Base material

Reinforced concrete, Concrete

Working mode

Hammer drilling

Products in this group use a Hilti TE-C type connection end (commonly called SDS-Plus).

TE-C-HSC-MW Setting tool

Description

Setting tool (HSC)

_{No technical data available}

HKD-TE-CX Setting tool (short)

ultimate

Description

Setting tool for short HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit

Connection end

TE-C (SDS-plus)

Base material

Reinforced concrete, Concrete

Working mode

Hammer drilling

TE-C-HDA-ST Setting tool

Description

Setting tool – required for installation of HDA undercut anchors

_{No technical data available}

HSU ST-G Setting tool

Description

Setting tool – required for installation of HSU-R stone undercut anchors

_{No technical data available}

TE-C HEX, TE-Y HEX Setting tool

Description

Setting tool for capsule anchor rods with hexagon heads

_{No technical data available}

TE-C-E Setting tool

Description

Setting tool for capsule anchor rods with conical heads

_{No technical data available}

HSV/HSA/HST/KB3/KB-TZ Setting tool

Description

Setting tool for driving compatible expansion anchors into concrete

_{No technical data available}

TE-Y-HDA-ST Setting tool

Description

Setting tool – required for installation of HDA undercut anchors

_{No technical data available}

Products in this group use a Hilti TE-Y type connection end (commonly called SDS-Max).

TE-Y-E Setting tool

Description

Setting tool for capsule anchor rods with Conical heads

_{No technical data available}

TE-T-E Setting tool

Description

Setting tool for capsule anchor rods with Conical heads

_{No technical data available}

HIS-S Setting tool

Description

Setting tool for internally threaded sleeves

_{No technical data available}

TE Setting adapter (HVU2)

Description

Setting adapter for capsule anchor rods with hexagon heads

_{No technical data available}

Setting tool HSD-G M20 3/4"X80

Description

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

_{No technical data available}

Setting tool HSD-G M6 1/4"X25/30

Description

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

_{No technical data available}

Setting tool HSD-G M12x25

Description

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

_{No technical data available}

Setting tool HSD-M M6 1/4"X25

Description

SDS-plus (TE-C) setting tool for drop-in anchors

_{No technical data available}

Setting tool HHD-S

Description

Setting tool

_{No technical data available}

Setting tool HSD-G M10 3/8"x30

Description

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

_{No technical data available}

Setting tool HSD-G M6 1/4"X25

Description

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

_{No technical data available}

Setting tool HSD-G M8 5/16"X30

Description

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

_{No technical data available}

Setting tool HSD-M M8 5/16"X30

Description

SDS-plus (TE-C) setting tool for drop-in anchors

_{No technical data available}

Setting tool HSD-M M8 5/16"X40

Description

SDS-plus (TE-C) setting tool for drop-in anchors

_{No technical data available}

Setting tool HSD-M M10 3/8"X30

Description

SDS-plus (TE-C) setting tool for drop-in anchors

_{No technical data available}

Setting tool HSD-M M10 3/8"X40

Description

SDS-plus (TE-C) setting tool for drop-in anchors

_{No technical data available}

Setting tool HSD-M M12 1/2"X50

Description

SDS-plus (TE-C) setting tool for drop-in anchors

_{No technical data available}

Setting tool HSD-M M16 5/8"X65

Description

SDS-plus (TE-C) setting tool for drop-in anchors

_{No technical data available}

Setting tool HSD-M M20 3/4"X80

Description

SDS-plus (TE-C) setting tool for drop-in anchors

_{No technical data available}

Setting tool HSD-G M8 5/16"x40

Description

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

_{No technical data available}

Setting tool HSD-G M10 3/8"X40

Description

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

_{No technical data available}

Setting tool HSD-G M12 1/2"X50

Description

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

_{No technical data available}

Setting tool HSD-G M16 5/8"X65

Description

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

_{No technical data available}

TE-YRT Hole roughening tool

Description

Roughening tool for diamond-cored holes in concrete

_{No technical data available}

T-handle X-NSD 1/4"

Description

Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools

Additional accessory information

T-handle for tightening X-BT threaded studs

Torque tool X-BT 1/4"

Description

Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools

Additional accessory information

Torque tool for tightening X-BT threaded studs

Socket wrench insert X-NSD 1/4"-16mm

Description

Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools

Additional accessory information

Socket for tightening X-BT-MF M10 threaded studs

Wedge HIT-OHW

Description

Injectable mortar accessories for overhead applications

_{No technical data available}

Drip guard HIT-OHC1

Description

Injectable mortar accessories for overhead applications

_{No technical data available}

_New

Calibration card S-CC BT 6

_New

Description

Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth

_{No technical data available}

S-TB Torque bar

ultimate

Description

Torque-controlled socket wrench for setting HSA anchors

Connection end

1/2 in square

_New

Check gauge HUS 8-10-14mm cordl.

_New

Description

Check gauge for HUS screw anchors

Material, corrosion

Carbon steel

Head configuration

n/a

PROFIS software

_New

Torque tool S-BT 1/4" - 5Nm

_New

Description

5 Nm torque tool for installing S-BT threaded screw-in studs on aluminium or steel (thickness < 6 mm)

_{No technical data available}

_New

Check gauge D=8-10-14mm

_New

Description

Check gauge for HUS screw anchors

Material, corrosion

Carbon steel

Head configuration

n/a

PROFIS software

_New

Torque tool X-BT 1/4" 20Nm / 14.8lbft

_New

Description

Torque tool for use with new-generation X-BT threaded studs

_{No technical data available}

_New

Torque tool S-BT 1/4" - 16Nm

_New

Description

16 Nm torque tool for installing S-BT threaded screw-in studs on steel (thickness < 6 mm)

_{No technical data available}

Hilti HIT-RB Brushing accessories

Description

Injectable mortar accessories for brushing and guiding

_{No technical data available}