System connectors and interfaces
Profile connectors and interfaces – baseplates, angle brackets, beam clamps, saddles and system nuts and bolts for connecting profiles and media in modular supports
194 Products
Filter
- Description
- Hot-dip galvanised (HDG) connector used to connect MIQ girders longitudinally for long spans in heavy-duty applications
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Galvanised, adjustable angle connector for the 90-degree attachment of MC-3D channels to one another indoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Electrogalvanized
- Material thickness
- 4 mm
- Description
- Galvanised, adjustable angle connector for the 90-degree attachment of MC-3D channels to one another outdoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness
- 4 mm
- Description
- Galvanised connector for fastening MC installation channels perpendicularly to concrete substructures with higher load requirements indoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Electrogalvanized
- Description
- Hot-dip galvanised (HDG) connector for fastening MC installation channels perpendicularly to concrete substructures with higher load requirements outdoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Hot-dip galvanized, 56 µm - ASTM A153
- Description
- Hot-dip galvanised (HDG) wing nut for fastening threaded components/bolts to the open face of MC installation channels
- Material composition
- QStE 380 TM - SEW 092
- Surface finish
- Multi-layer coating, designed for corrosion environment category C3 according to ISO 9223
- Description
- Hot-dip galvanised (HDG) angle connector for 90-degree attachment of MC-3D channels to one another with higher load requirements outdoors
- Material composition
- Structural steel with minimum yield strength of 235 N/mm2
- Surface finish
- Hot-dip galvanized, 56 µm - ASTM A153
- Material thickness
- 4 mm
- Description
- Galvanized perforated bands used in various applications
- Base material type
- Concrete
- Material composition
- DX51D+Z275-N-A - DIN EN 10346
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised medium-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- DD11 - DIN EN 10111
- Surface finish
- Indoor Coated - Electro galvanised
- Environmental conditions
- Dry indoor conditions (C1) Indoor with temporary condensation (C2)
- Description
- Galvanised beam clamp for fastening threaded rods to steel girders without internal thread
- Base material type
- Steel
- Material composition
- EN-GJMB – EN 1562
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Galvanised retaining strap for fastening MAB beam clamps more securely
- Base material type
- Steel
- Material composition
- Steel
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- MIQM Wing nut, connecting element for MIQ profiles
- Material composition
- Nut: C4C - DIN EN 10263, Plastic: PA 6.6
- Surface finish
- Outdoor Coated - HDG
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Standard hot-dip galvanised (HDG) connector for fastening MI girders to one another
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Backing plate: EN-GJMW-400-5 - DIN EN 1562, EN-GJMB-450-7 - DIN EN 1562; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: Connector 55 µm - DIN EN ISO 1461; Backing plate, Bolt, Nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)
- Description
- Connector for fastening MI girders to concrete
- Material composition
- Connector: DD11 MOD - HN 555-4, S235JR - DIN EN 10025-2; Bolt: Steel grade 8.8; Nut: Steel grade 8
- Surface finish
- HDG: connector 55 µm - DIN EN ISO 1461; bolt, nut 45 µm - DIN EN ISO 1461
- Environmental conditions
- Outdoor, low to moderate pollution (C3 / C4 - low)